Masterlog is a high performance, low
power, and efficient logger. It is
designed to eliminate the needs of
additional server on observation site.
Masterlog communicates to Nodelog through
Bluetooth V5.0 and it can transmit data up
to 100m. Masterlog can be connected up to
16 Nodelogs (up to 128 analogue
channels).
Nodelog is a low power analogue and digital
I/O extension for Masterlog. It is designed
to simplify cabling management in
observation site.
Observation sensors can be divided into
several small groups, with Nodelog in its
center, so we can use short cables. The
advantages of short cables eliminate the
risk of lightning surge and signal
attenuation from long cable.
GT-UniLogg is a high performance, low
power, and efficient logger. It is designed
to eliminate the needs of additional
server or modem on observation site. This
logger provides basic utility for
observation such as database, real time
data monitoring via web browser, data
transfer via embedded GSM modems, web
based configuration, and many more.
The reports can then be transmitted
through FTP, HTTP, Socket TCP, SMS, and
MQTT to the server.
G-Tek Rain Accumulator System, is a
high-end aerodynamic tipping bucket rain
gauge system that has standard precision
instruments for measuring rainfall
volume and/or rate.
Rain enters the gauge through a large
funnel, the rim of which is protected by
a metal ring to prevent distortion.
This rain gauge contains an internal
siphon mechanism that causes rain to
flow at a steady rate to the tipping
bucket mechanism (regardless of
intensity).
This precipitation observation system
also using GT-UniLogg as the logger.
GT-UniLogg is designed to record,
visualize, and managing its data
telemetry so it can simplify the user
configuring the logger.
Precision compensation technology design, sensitive components, stable
and reliable.
3 different pressure ranges for you to choose, enough to meet your basic need. Light weight and small dimension, convenient to install and operate. It has complete surge voltage
protection function.
Step Generator Multi Frequency is an
adjustable sine wave generator and pulse
generator. Sine waves can be adjusted
for consecutive expenditure from low to
high frequency and amplitude that can be
adjusted so that the cliper does not
occur.
The machine uses microcontroller and
LCD display. Crystal Tx as the best
frequency source so get good
stability.Pulse can be set up to 250sec.
Input data using the software so much
easier to use and unchanged.
ADMT-6B Multi-Function Digital DC
IP(Induced Polarization) Detector is
an improved geophysical detector
uses the latest circuit design and
devices with high measuring
precision,which is widely used in
water detection,metal detector and
mineral prospecting .Its weight is
reduced and it uses the humanized
human-computer interface, waterproof
shell etc.
Built-in GPS, coordinate record,
navigation lights, and the
connection is more simple, and the
instrument is more reliable.
Full-scale automatic tuning or
artificial manual tuning.
Built-in precision clock, GPS
timing to ensure the clock of base
stations and mobile stations is
accurate synchronization.
Portable and light, one person
can finish all the work. Equipped
with the software to do the
diurnal correction and create the
contour map and profile map.
Geophysical
MASW/Refraction/Reflection
Seismograph with Geophone: also
known as Engineering Seismology,
generally refers to seismic
exploration instruments within the
exploration depth of nearly
hundreds of meters, which are
widely used in mineral,
hydrogeology, engineering geology
and other fields.
Borehole Seismic Survey System
Vertical Hole PS Seismic Survey with
Seismograph and Down Hole
Geophone
The FGE-K2 Magnetometer Base
Station is a high-end stable
variometer for geomagnetic
observatories and variometer
stations. This instrument is a
tri-axial magnetometer, based on
high-end commercially available
fluxgate sensor DTU space.
Fluxgate Magnetometer was to
construct a reliable and very
stable instrument that is easy
to set up and operate.
The Evaporation Transmitter
G250 is a high-precision,
narrow-range absolute position
sensor developed by
magnetostrictive effect. The
sensor is a non-contact
measurement mode. It has high
reliability and long service
life feature.
The Evaporation Transmitter
G250 liquid level sensor
adopts highperformance
materials and automatic
calibration equipment, and has
extremely high cost
performance.
GTEK P2510 Particulate Sensor
is a technological breakthrough
in optical PM sensors. Its
measurement principle is based
on laser scattering. This
technology, together with
high-quality and long-lasting components,
enables precise measurements
from its first operation and throughout its lifetime of more
than ten years.
The Gtek Seiscomp C57 is a
ruggedized seismic data
acquisition and monitoring
system designed for real-time
earthquake detection and
analysis. It offers
configurations with various processors,
RAM, storage and I/O options to
meet the needs of different
seismic monitoring stations.
Overall, the Gtek Seiscomp C57
is a full-featured yet compact
seismic monitoring node that
enables round-the-clock
earthquake monitoring via an
integrated software and hardware
solution.